- Ruian city, zhejiang province, looking at the south corner of the north corner industrial zone
- 0577-65151766
- zhangqing@rh-jx.net
2017-08-17
The indispensable mechanical equipment in the production of bubble film is the bubble film machine. The bubble membrane is actually a membrane that contains the bubble interlayer in the middle of the membrane. If you can't control the bubble film machine, it is likely that your product quality and output are not so ideal under the limited time and material constraints. On the other hand, if you control the bubble film machine, with limited time and materials, your product quality is not only high quality, but also the product yield is very high. So how to regulate our bubble membrane machine operation。
1. Check that the temperature control is in good condition and the heating appliance is in good condition, and the heating temperature of each point should be adjusted in a timely manner.
2. Check the traction speed and control the film thickness.
3. Observe and adjust the thickness of the film to meet the standard.
4. Check air storage cylinder pressure, not too high, but should have backup pressure.
5. Check the proportion of raw materials and mix them evenly.
6. Check the raw materials for impurities, and make sure to use the magnet to check the iron in time.
7. Check the speed of deceleration box and air cylinder lubricating oil.
8. Regularly check the temperature rise of each motor and the transmission of the bubble membrane machine.